EC45x10 Nitrile Rubber End Cap Covers Seal 45mm Outside Diameter 10mm Width 45 x 10 mm - AVX Seals Store
Pasa el cursor sobre la imagen para ampliarla. Clic en la imagen para aumentar
EC45x10 Nitrile Rubber End Cap Covers Seal 45mm Outside Diameter 10mm Width 45 x 10 mm - AVX Seals Store

EC45x10 Nitrile Rubber End Cap Covers Seal 45mm Outside Diameter 10mm Width 45 x 10 mm

Ahorrar $10.58
AVX SealsSKU: EC45x10
Precio:
$7.91 $18.49

Descripción

Nitrile Rubber End Cap |  Shaft Diameter (45mm) x Width (10mm) 

Nitrile Rubber End Cap (EC45x10), are designed to prevent a shaft from passing through the housing wall. The body is steel with a nitrile rubber coating and provides protection for the bearings or for a shaft that does not protrude. Shaft Dia. 45mm Width 10mm

  • Brand : AVX Seals
  • Item Sku : EC45x10
  • Type : EC 45x10 mm
  • Outer : 45mm
  • Width : 10mm
  • Size : 45mm x 10mm
  • Seal Material : Nitrile Butadiene Rubber
  • Temperature Range : -40 to 248 F
  • Seal Type: Static (non-rotating, non-passing shaft)

Applications:

  • Electric motor housings (non-drive end or unused ports)

  • Gearboxes with inactive or redundant shaft bores

  • Hydraulic systems with capped cylinder ports

  • Bearing chambers in enclosed systems

  • Pumps and compressors with sealed ends

  • Industrial automation and mechanical housings

  • Agricultural and heavy-duty machinery

❓ Frequently Asked Questions (FAQs)

✅ Q1: What is this 45mm Nitrile End Cap used for?

A1: It is used to seal a housing bore statically where a shaft does not protrude, protecting the bearings and internal components from contaminants like oil, dust, and moisture.

✅ Q2: Can this be used in rotating applications?

A2: No. This is a static sealing component. It should not be used in applications where the shaft rotates or passes through the housing.

✅ Q3: Why is Nitrile Rubber used for the coating?

A3: NBR (Nitrile Rubber) offers:

  • Excellent oil and grease resistance

  • Good abrasion resistance

  • Operating temperature range of approximately -40°C to +100°C

  • A tight seal against contaminants and environmental exposure

✅ Q4: How is the Nitrile Rubber End Cap installed?

A4:

  1. Clean the bore surface of the housing

  2. Align the end cover with the opening

  3. Gently press-fit using a seal driver or soft mallet

  4. Ensure the seal is flush and undamaged.

You may also like

Recently viewed